These pages shall walk you through the steps in installing and replacing a dryer cord. There’s two kinds of cords: three cable cords and four wire cords. One most regularly expected question I have about dryers is “where may I find an adapter so my cable will connect to the receptacle?” My response is constantly they don’t make an adapter for dryer cords. Another typical question I get is” i recently purchased a dryer, why didn’t it have a cord?” My response is some homes have actually three cable receptacles plus some have actually four wire receptacles therefore dryers don’t include cable.

Never ever make an effort to replace the receptacle within your house to always fit your cord replace the cable.

Determine the kind of dryer cable you’ll need

The first step in setting up a dryer cable will be determine the kind of cord you’ll need. Glance at your dryer receptacle in your wall surface. Some homes have actually four-wire receptacles plus some have actually three cable receptacles. This simply varies according to once the wiring had been done and exactly what the code is at the full time. Never ever try to replace the receptacle, always install the cord that is correct corresponds to your form of receptacle your property has. Below is an image that can help you figure out the sort of receptacle you’ve got.

Keep in mind that the receptacle shall have screw hole in the biggest market of the receptacle. Don’t blunder this screw gap for an additional wire.

Install Three-Wire www sugardaddie com Cord

This element of these pages will explain just how to use a three cable cable. If the household features a three-wire receptacle you have to install a three wire cord. Many three wire cords have actually three wires that are gray line with one another. The dyer will have terminal block with three articles, which correspond to every for the cable cables. The post into the center could be the basic cable, which will be also used being a ground generally there must certanly be a cable or perhaps a band linking the guts post to ground. Dryers feature a band or wire linking the guts post to ground however if there clearly was formerly a four-wire cord on the dryer it may possibly be lacking. When there is perhaps not just a wire or strap connecting the guts post to ground you have to locate a cable to take action. This cable should be at the least as large as the wires regarding the cord. This will be significant because if this ground band is certainly not provide the dryer won’t be grounded and certainly will cause shock that is electric by touching the dryer. Link the middle cable associated with cable towards the center post from the dryer terminal block. Link the 2 outside wires into the two post that is outside the dryer terminal block. The dryer cord is sold with a clamp, set it up as well as your cable is set up. The diagram below should help.

Install Four-Wire Cord